Skip to main content
TeslaCharger

№ 29 · Reviewed · 2026 review

Humax

MX7

3.9 / 5 · independently reviewed · 5 years (on online registration) warranty

Last updated By Joe McGrath

Buy it if the wall is sheltered and the warranty is what you came for. £599 buys OZEV approval that checks out, a CT clamp and the protection in the box, and five years of cover against the usual three — though only if you register online, which is Humax's condition. It does not buy tariff automation: Octopus Intelligent is "in progress", Agile "not officially supported yet", and the V2G in the name is not commercially enabled. Nor a settled answer on IP65 versus IP54, since Humax's own datasheet and website disagree. On an exposed wall, the Ohme Home Pro is £64 cheaper and unambiguous.

Unit only

£599

Installed from

£1049

After OZEV

£549

Buy from Humax(opens in new window)
Humax MX7 — product shot

Max Power Output

7.4kW (32A, single-phase 230V)

Connector

Type 2 — socket, or tethered 5m / 7.5m

Connectivity

Wi-Fi, Bluetooth LE, Ethernet; 4G optional

Protocols

OCPP 1.6J; ISO 15118 (PLC vehicle identification)

Dimensions

Socket 335 × 210 × 144 mm; tethered 335 × 210 × 133 mm

Weight

3.25 kg (socket); 4.72 kg (5m); 5.43 kg (7.5m)

What we loved

  • PlusOn the government's eligible chargepoint list as HUMAX MX7 (HS71007 / HS71007U)
  • PlusFive years of cover if you register online — two more than Ohme or Indra give as standard
  • PlusCT clamp supplied in the box, so load balancing needs no extra hardware
  • PlusOver-current, residual-current (RCD) and surge protection built in
  • PlusSold three ways: Type 2 socket, or tethered at 5 m or 7.5 m
  • PlusOCPP 1.6J, with Wi-Fi, Bluetooth LE and Ethernet as standard and 4G optional
  • PlusIK10 impact rating — the top of the scale

What we didn't

  • MinusHumax's datasheet and its own website spec table give opposite IP ratings; the marketing above both says IP65 without naming a variant
  • MinusThe five-year warranty is conditional: Humax's page reads "5 years warranty when you register this product online"
  • MinusNo live tariff integration — Humax calls Octopus Intelligent support "in progress" and Agile "not officially supported yet"
  • MinusV2G/V2H is hardware-ready only: Humax says the ISO 15118 software and certification are still in progress
  • Minus£599 buys less tariff automation than a £535 Ohme Home Pro
  • MinusLoad balancing needs the CT clamp wired back near the charger — a cable run to budget for, and Humax does not support a wireless CT
  • MinusHumax Direct pre-ticks a standard-installation box, and publishes no figure for work outside its standard fit

Which tariff pairs best

On a cheap overnight tariff, Humax MX7 saves up to £557 a year.

Estimated against the 24.5p/kWh standard variable rate at 10,000 miles a year. Sorted by annual saving.

Best saving

Octopus Agile

Octopus Energy

£557

saving / yr

Off-peak rate
5p
Window
Variable
Integration
App schedulingThe charger's app supports scheduling to align with off-peak hours. You set the hours; the charger runs on them.
Read the tariff review →

£500

saving / yr

Off-peak rate
7p
Window
11:30pm–5:30am
Integration
App schedulingThe charger's app supports scheduling to align with off-peak hours. You set the hours; the charger runs on them.
Read the tariff review →

£494

saving / yr

Off-peak rate
7.2p
Window
12am–5am
Integration
App schedulingThe charger's app supports scheduling to align with off-peak hours. You set the hours; the charger runs on them.
Read the tariff review →

£486

saving / yr

Off-peak rate
7.5p
Window
12am–6am
Integration
App schedulingThe charger's app supports scheduling to align with off-peak hours. You set the hours; the charger runs on them.
Read the tariff review →
Octopus Go

Octopus Energy

£457

saving / yr

Off-peak rate
8.5p
Window
12:30am–5:30am
Integration
App schedulingThe charger's app supports scheduling to align with off-peak hours. You set the hours; the charger runs on them.
Read the tariff review →
EDF GoElectric

EDF Energy

£443

saving / yr

Off-peak rate
8.99p
Window
12am–5am
Integration
App schedulingThe charger's app supports scheduling to align with off-peak hours. You set the hours; the charger runs on them.
Read the tariff review →

£443

saving / yr

Off-peak rate
9p
Window
12am–5am
Integration
App schedulingThe charger's app supports scheduling to align with off-peak hours. You set the hours; the charger runs on them.
Read the tariff review →

£300

saving / yr

Off-peak rate
14p
Window
Any time
Integration
App schedulingThe charger's app supports scheduling to align with off-peak hours. You set the hours; the charger runs on them.
Read the tariff review →

Figures are estimates. Your actual saving depends on how much charging you do in the off-peak window versus during the day, and on your provider's standing charge. Read the individual tariff reviews for the full picture.

The real cost

What Humax MX7 costs you over five years.

The up-front install, plus five years of electricity on your tariff — against public rapid charging and petrol at current rates. Adjust for your vehicle and mileage below.

10,000mi
3,00020,000

Humax MX7 supports app-based scheduling to align with Octopus Agile off-peak hours. Read the Octopus Agile review →

Typical 5-year total

£1,788

£1,074 up front, then about £143 a year in electricity on Octopus Agile.

This charger + home tariff£1,788
Public rapid only£11,286
Petrol equivalent£9,000

Saves about £10,571 over 5 years vs public rapid charging, £8,286 vs petrol at 18p/mile. Adjust the inputs above for your numbers.

Humax's two official documents disagree about which MX7 is the weatherproof one. The datasheet, dated 11 August 2025, gives "Ingress Protection — Tethered: IP65, Socket: IP54". The spec table on Humax's own website, for the same charger, states the reverse: socket IP65, tethered IP54 at both cable lengths. The two are exactly inverted, and the product pages above them lead with a flat "IP65 Waterproof Rating" that names no variant at all.

IP54 is common enough at this end of the market that the rating on its own is not the complaint — the Easee One, the Indra Smart PRO and the Zaptec Go 2 all sit there. Not being able to tell which one is going on your wall is. Until Humax corrects the paperwork, the safe assumption for the socket unit is IP54: mount it under a porch, a canopy or inside a garage rather than on an exposed elevation, and get the ingress rating of the exact SKU you are buying — the socket unit is H95-0132 — confirmed in writing before the installer arrives.

Best for: a sheltered wall, and a buyer who wants OZEV approval, RFID and five years of cover at £599, and has no immediate need for tariff automation.

Installation

The socket unit is 335 × 210 × 144 mm and 3.25 kg; the tethered units are 335 × 210 × 133 mm, at 4.72 kg (5 m) and 5.43 kg (7.5 m). 7.4kW on a 32A single-phase supply. The datasheet lists over-current, residual-current and surge protection inside the unit, along with an IK10 impact rating.

The CT clamp is in the box, with the wall bracket, two RFID cards and an extension connector, so load balancing needs no extra hardware bought in. It does need a cable run: Humax says the clamp "must be installed near the charger" and that a wireless CT is not supported, which is worth raising with an electrician before the quote rather than after. The socket version takes your own Type 2 cable — a non-issue for a Tesla, which ships with one.

Humax sells the installation itself. Its booking page advertises a standard fit from £450; the standard-installation package listed on Humax Direct is £500. Read either as a floor rather than a price. Standard covers up to 10 m of cabling, mounting, the safety components, testing, certification and the notifications; anything outside that is surveyed after you have bought and quoted separately, and Humax publishes no figure for it. Full walkthrough in our install guide.

Tariff compatibility

Humax answers this itself, and the answer is no. Its FAQ lists Octopus Intelligent support as "integration in progress, support coming soon", and Octopus Agile as "not officially supported yet". So the charger does not talk to a supplier today. Scheduling is manual windows set in the Humax app: adequate on a fixed off-peak tariff like Octopus Go, where the window is set once, and the wrong tool for Agile, where the price moves through the day and you want the charger doing the hunting. The Ohme Home Pro does that, and costs £64 less.

For a Tesla the gap is narrower than it looks. Intelligent Octopus Go reaches a Tesla through the car's own API rather than through the charger, so charger-side integration matters less here than it would to most other EVs. OCPP 1.6J is present if you would rather point the unit at third-party backend software. The wider pattern is in our smart-tariff chargers guide.

Price

ElementCost
Unit — socket (list £649)£599
Unit — tethered (list £669)from £629
Humax standard installation£450–£500
Socket, installed from£1,049

The £599 is the hardware. Humax Direct ticks the standard-installation option by default, so the basket total is the installed price unless you untick it.

The MX7 is on the government's eligible chargepoint list, under Humax Electronics, as HUMAX MX7 — HS71007 and HS71007U. Those model IDs do not match the retail SKUs, which is worth knowing if an installer cross-checks. The £500 OZEV grant itself reaches only renters, flat owners and landlords, so most buyers here cannot claim it whatever the list says.

Against the field

At £599 the MX7 sits £64 above the Ohme Home Pro and level with the Indra Smart PRO. If the ingress question is what puts you off, the alternatives are the ones whose rating is not in dispute: the Ohme at £535 is IP65 and automates the tariff, the Indra Smart Lux is IP67 for £615, and the Sync Energy Wall Charger 2 is IP65 for £362.

What the Humax holds over the Ohme and the two Indras is five years of cover against their three — on the condition Humax attaches to it, that you register the unit online — plus the PLC module, RFID and IK10. The PLC module is also the basis of the V2G pitch on the box, and that pitch is the one to discount hardest: Humax states that the ISO 15118 software and certification are still in progress, that bidirectional use depends on the carmaker enabling it, and that it needs DNO sign-off besides. Buy the MX7 for what it does now. Our V2G explainer covers how long that wait has already been.

We'll sort the installation

Get Installation Quotes