Head to head
Tesla Wall Connector (Gen 3) vs Rolec Zura
The decision
The decision
- Tesla installed
- £875–£1,075
- £475 unit
- Rolec installed
- £1,237–£1,437
- £837 unit
- Tesla warranty
- 4 years
- Rolec warranty
- 3 years
Choose Tesla Wall Connector (Gen 3) if
Choose Rolec Zura if
Installed ranges combine the current unit or package price with the recorded installation basis. Complex cable runs and electrical work can cost more.


At a glance
Quick stats
Feature breakdown
The Tesla Wall Connector (Gen 3) has a £362 lower recorded unit or package price: £475 against £837 for the Rolec Zura.
Using each product's recorded installation basis, the Tesla Wall Connector (Gen 3) is £875–£1,075 installed and the Rolec Zura is £1,237–£1,437 installed. These are planning ranges, not quotes; cable routes and electrical remedial work can change the result.
Both the Tesla Wall Connector (Gen 3) (7.4kW / 22kW) and Rolec Zura (7.4kW / 22kW) support three-phase charging, offering up to 22kW on a three-phase supply. On a standard UK single-phase supply, both deliver around 7kW — more than enough for overnight charging.
On a standard UK single-phase supply, both will charge a Tesla Model 3 Long Range (75kWh battery) from 20% to 80% in approximately 5–6 hours overnight. Even a Tesla Model Y with its larger battery completes a typical daily top-up well within an overnight window. For the vast majority of UK Tesla owners, single-phase 7kW charging is more than sufficient — you'll wake up to a full battery every morning.
The Tesla Wall Connector (Gen 3) offers: Tesla app integration, Scheduled charging, Power sharing (up to 6 units), Wi-Fi connected, OTA updates. The Rolec Zura offers: Monta app (3 years included), Charge scheduling and price-based smart charging, 4G LTE + Wi-Fi + Ethernet, Dynamic load balancing (CT clamp included on single-phase), MID Class 1 meter, RFID / NFC reader, OCPP 1.6J, PEN fault detection (TruePEN), Single or dual outlet; upgradeable later.
Breaking these down by category: for connectivity, the Tesla Wall Connector (Gen 3) uses Wi-Fi connected, while the Rolec Zura uses 4G LTE + Wi-Fi + Ethernet. For energy management, the Tesla Wall Connector (Gen 3) provides Power sharing (up to 6 units), compared to the Rolec Zura's Dynamic load balancing (CT clamp included on single-phase).
The Rolec Zura supports solar integration, allowing you to divert surplus solar energy to charge your Tesla. The Tesla Wall Connector (Gen 3) does not have built-in solar diverting. If you have solar panels (or plan to install them), this is a significant advantage for the Rolec Zura.
The Rolec Zura supports solar diversion through its energy management system. This means it can dynamically adjust the charge rate to match your available solar surplus.
The Tesla Wall Connector (Gen 3) comes with a 4 years warranty, while the Rolec Zura offers 3 years. The Tesla Wall Connector (Gen 3) offers 1 year more coverage.
For weatherproofing, the Tesla Wall Connector (Gen 3) is rated IP44 (indoor/outdoor), while the Rolec Zura is rated IP65 enclosure, IP54 socket; IK10 per datasheet (IK08 on Rolec's page). Any rating of IP54 or above is suitable for a UK outdoor installation.
Detailed breakdown
Full specs comparison
Max Power Output
- Tesla Wall Connector (Gen 3)
- 7.4kW (single-phase) / 22kW (three-phase)
- Rolec Zura
- 7.4kW single-phase (32A) per outlet; 22kW three-phase model
Cable Length
- Tesla Wall Connector (Gen 3)
- 7.3 metres
- Rolec Zura
- Untethered, or 5 m / 10 m tethered
Connector
- Tesla Wall Connector (Gen 3)
- Type 2 (tethered)
- Rolec Zura
- Type 2 socket or tethered; single or dual outlet
Connectivity
- Tesla Wall Connector (Gen 3)
- Wi-Fi
- Rolec Zura
- 4G LTE, Wi-Fi 2.4GHz, Ethernet, Bluetooth (installer set-up), NFC
Dimensions
- Tesla Wall Connector (Gen 3)
- 353mm × 152mm × 124mm
- Rolec Zura
- 260mm × 410mm × 157mm
Weight
- Tesla Wall Connector (Gen 3)
- 5.3 kg
- Rolec Zura
- 3.75 kg (single socket) to 11.7 kg (dual 10 m tethered)
IP Rating
- Tesla Wall Connector (Gen 3)
- IP44 (indoor/outdoor)
- Rolec Zura
- IP65 enclosure, IP54 socket; IK10 per datasheet (IK08 on Rolec's page)
Certification
- Tesla Wall Connector (Gen 3)
- Not OZEV approved
- Rolec Zura
- OLEV/OZEV approved (all variants), EN 61851-1, Smart Charge Point Regulations
Protection
- Tesla Wall Connector (Gen 3)
- —
- Rolec Zura
- 6mA DC detection and PEN fault detection built in; 30mA Type A RCBO required upstream
Metering
- Tesla Wall Connector (Gen 3)
- —
- Rolec Zura
- MID Class 1
| Specification | Tesla Wall Connector (Gen 3) | Rolec Zura |
|---|---|---|
| Max Power Output | 7.4kW (single-phase) / 22kW (three-phase) | 7.4kW single-phase (32A) per outlet; 22kW three-phase model |
| Cable Length | 7.3 metres | Untethered, or 5 m / 10 m tethered |
| Connector | Type 2 (tethered) | Type 2 socket or tethered; single or dual outlet |
| Connectivity | Wi-Fi | 4G LTE, Wi-Fi 2.4GHz, Ethernet, Bluetooth (installer set-up), NFC |
| Dimensions | 353mm × 152mm × 124mm | 260mm × 410mm × 157mm |
| Weight | 5.3 kg | 3.75 kg (single socket) to 11.7 kg (dual 10 m tethered) |
| IP Rating | IP44 (indoor/outdoor) | IP65 enclosure, IP54 socket; IK10 per datasheet (IK08 on Rolec's page) |
| Certification | Not OZEV approved | OLEV/OZEV approved (all variants), EN 61851-1, Smart Charge Point Regulations |
| Protection | — | 6mA DC detection and PEN fault detection built in; 30mA Type A RCBO required upstream |
| Metering | — | MID Class 1 |
FAQ
Frequently asked questions.
Related comparisons