Head to head
myenergi zappi vs NexBlue Edge
The decision
The decision
- myenergi installed
- £1,084–£1,284
- £684 unit
- NexBlue installed
- £1,049–£1,299
- £599 unit
- myenergi warranty
- 3 years (5 with £120 extension)
- NexBlue warranty
- 3 years
Choose myenergi zappi if
Choose NexBlue Edge if
Installed ranges combine the current unit or package price with the recorded installation basis. Complex cable runs and electrical work can cost more.


At a glance
Quick stats
Feature breakdown
The NexBlue Edge has a £85 lower recorded unit or package price: £599 against £684 for the myenergi zappi.
Using each product's recorded installation basis, the myenergi zappi is £1,084–£1,284 installed and the NexBlue Edge is £1,049–£1,299 installed. These are planning ranges, not quotes; cable routes and electrical remedial work can change the result.
Both the myenergi zappi (7kW / 22kW) and NexBlue Edge (7.4kW / 22kW) support three-phase charging, offering up to 22kW on a three-phase supply. On a standard UK single-phase supply, both deliver around 7kW — more than enough for overnight charging.
On a standard UK single-phase supply, both will charge a Tesla Model 3 Long Range (75kWh battery) from 20% to 80% in approximately 5–6 hours overnight. Even a Tesla Model Y with its larger battery completes a typical daily top-up well within an overnight window. For the vast majority of UK Tesla owners, single-phase 7kW charging is more than sufficient — you'll wake up to a full battery every morning.
The myenergi zappi offers: Solar diverting (Fast / Eco / Eco+ modes), On-unit LCD screen and buttons, myenergi app, Octopus Intelligent Go and OVO Charge Anytime integration, Agile price-based scheduling, Dynamic load balancing (Grid Limit), Wi-Fi + Ethernet, no hub required, myenergi ecosystem (eddi, libbi, harvi), PEN fault detection (zapsafe). The NexBlue Edge offers: myNexBlue app with EcoPilot tariff-aware scheduling, Octopus Intelligent Go and OVO Charge Anytime links, Wi-Fi + built-in 4G eSIM + Bluetooth (no Ethernet), Dynamic load balancing and solar surplus with the NexBlue Zen (sold separately), RFID / NFC reader (card in the box), OCPP 1.6J, PEN fault detection built in, "Always lock" cable mode makes the socket behave like a tethered unit.
Breaking these down by category: for connectivity, the myenergi zappi uses Wi-Fi + Ethernet, no hub required, while the NexBlue Edge uses Wi-Fi + built-in 4G eSIM + Bluetooth (no Ethernet). For energy management, the myenergi zappi provides Dynamic load balancing (Grid Limit), compared to the NexBlue Edge's Dynamic load balancing and solar surplus with the NexBlue Zen (sold separately).
Both the myenergi zappi and NexBlue Edge support solar integration, allowing you to charge your Tesla using surplus solar energy rather than drawing from the grid.
The myenergi zappi uses a CT clamp on your meter tails to measure real-time surplus generation, enabling its Eco and Eco+ modes. The NexBlue Edge supports solar diversion through its energy management system.
Both the myenergi zappi and NexBlue Edge support smart energy tariffs, enabling automated off-peak charging at significantly reduced rates.
The myenergi zappi supports compatible Octopus scheduling through its supplier integration. The NexBlue Edge supports smart tariff scheduling with popular EV tariffs.
The myenergi zappi comes with a 3 years (5 with £120 extension) warranty, while the NexBlue Edge offers 3 years. Both offer the same warranty length.
For weatherproofing, the myenergi zappi is rated IP65 + IK10, while the NexBlue Edge is rated IP54, IK08. Any rating of IP54 or above is suitable for a UK outdoor installation.
Detailed breakdown
Full specs comparison
Max Power Output
- myenergi zappi
- 7kW single-phase / 22kW three-phase (multiphase unit)
- NexBlue Edge
- 7.4kW single-phase (32A) or 22kW three-phase (32A); 6A minimum
Cable Length
- myenergi zappi
- 6.5 metres (tethered version)
- NexBlue Edge
- Untethered — supply your own Type 2 cable
Connector
- myenergi zappi
- Type 2 (tethered or untethered)
- NexBlue Edge
- Type 2 socket with lockable "always lock" mode
Connectivity
- myenergi zappi
- Wi-Fi 2.4GHz, Ethernet; 868MHz link to harvi/eddi/libbi
- NexBlue Edge
- Wi-Fi 2.4GHz, 4G LTE-M eSIM, Bluetooth 4.2, RFID/NFC
Dimensions
- myenergi zappi
- 438mm × 282mm × 122mm
- NexBlue Edge
- 235mm × 230mm × 130mm
Weight
- myenergi zappi
- 3.0 kg untethered / 5.5 kg tethered (single-phase)
- NexBlue Edge
- 1.9 kg
IP Rating
- myenergi zappi
- IP65 + IK10
- NexBlue Edge
- IP54, IK08
Protection
- myenergi zappi
- 6mA DC detection and zapsafe PEN fault protection built in; Type A RCD upstream
- NexBlue Edge
- 6mA DC (RDC-DD) and 30mA AC detection built in; external Type A RCD required; PEN fault detection built in
Display
- myenergi zappi
- Backlit LCD with buttons, PIN lock
- NexBlue Edge
- —
Certification
- myenergi zappi
- OLEV/OZEV approved (all variants), UK Smart Charge Point Regulations
- NexBlue Edge
- OZEV/EVCG approved (Edge UK), BS 7671:2018 A2 PEN protection, Smart Charge Point Regulations
Metering
- myenergi zappi
- —
- NexBlue Edge
- Built-in, ±2% (not MID; the Edge Max adds MID)
| Specification | myenergi zappi | NexBlue Edge |
|---|---|---|
| Max Power Output | 7kW single-phase / 22kW three-phase (multiphase unit) | 7.4kW single-phase (32A) or 22kW three-phase (32A); 6A minimum |
| Cable Length | 6.5 metres (tethered version) | Untethered — supply your own Type 2 cable |
| Connector | Type 2 (tethered or untethered) | Type 2 socket with lockable "always lock" mode |
| Connectivity | Wi-Fi 2.4GHz, Ethernet; 868MHz link to harvi/eddi/libbi | Wi-Fi 2.4GHz, 4G LTE-M eSIM, Bluetooth 4.2, RFID/NFC |
| Dimensions | 438mm × 282mm × 122mm | 235mm × 230mm × 130mm |
| Weight | 3.0 kg untethered / 5.5 kg tethered (single-phase) | 1.9 kg |
| IP Rating | IP65 + IK10 | IP54, IK08 |
| Protection | 6mA DC detection and zapsafe PEN fault protection built in; Type A RCD upstream | 6mA DC (RDC-DD) and 30mA AC detection built in; external Type A RCD required; PEN fault detection built in |
| Display | Backlit LCD with buttons, PIN lock | — |
| Certification | OLEV/OZEV approved (all variants), UK Smart Charge Point Regulations | OZEV/EVCG approved (Edge UK), BS 7671:2018 A2 PEN protection, Smart Charge Point Regulations |
| Metering | — | Built-in, ±2% (not MID; the Edge Max adds MID) |
FAQ