Head to head
Andersen A3 vs Sync Energy Link
The decision
The decision
- Andersen EV installed
- £1,430–£1,655
- £995 unit
- Sync Energy installed
- £865–£1,065
- £465 unit
- Andersen EV warranty
- 7 years
- Sync Energy warranty
- 3 years
Choose Andersen A3 if
Choose Sync Energy Link if
Installed ranges combine the current unit or package price with the recorded installation basis. Complex cable runs and electrical work can cost more.


At a glance
Quick stats
Feature breakdown
The Sync Energy Link has a £530 lower recorded unit or package price: £465 against £995 for the Andersen A3.
Using each product's recorded installation basis, the Andersen A3 is £1,430–£1,655 installed and the Sync Energy Link is £865–£1,065 installed. These are planning ranges, not quotes; cable routes and electrical remedial work can change the result.
Both the Andersen A3 (7.4kW) and Sync Energy Link (7.4kW) are single-phase chargers, delivering around 7–7.4kW on a standard UK home supply.
On a standard UK single-phase supply, both will charge a Tesla Model 3 Long Range (75kWh battery) from 20% to 80% in approximately 5–6 hours overnight. Even a Tesla Model Y with its larger battery completes a typical daily top-up well within an overnight window. For the vast majority of UK Tesla owners, single-phase 7kW charging is more than sufficient — you'll wake up to a full battery every morning.
The Andersen A3 offers: Andersen app, Smart tariff support, Solar integration, Scheduled charging, Hidden cable system, Wi-Fi connected. The Sync Energy Link offers: Sync Energy app with Octopus Go and Agile schedule modes, Tariff Sense cost tracking, Auto Solar Charging (CT clamp in the box), Dynamic load balancing, Wi-Fi + Ethernet + Bluetooth; 4G on G models (3 years of data), OCPP 1.6J, Metal box: 40A Type A RCD, 40A MCB and Type 2 SPD built in, PEN fault protection built in.
Breaking these down by category: for connectivity, the Andersen A3 uses Wi-Fi connected, while the Sync Energy Link uses Wi-Fi + Ethernet + Bluetooth; 4G on G models (3 years of data). For energy management, the Andersen A3 provides basic monitoring, compared to the Sync Energy Link's Sync Energy app with Octopus Go and Agile schedule modes, Tariff Sense cost tracking, Dynamic load balancing.
Both the Andersen A3 and Sync Energy Link support solar integration, allowing you to charge your Tesla using surplus solar energy rather than drawing from the grid.
The Andersen A3 supports solar diversion through its energy management system. The Sync Energy Link supports solar diversion through its energy management system.
The Andersen A3 integrates with smart energy tariffs, automatically charging at the cheapest off-peak rates. The Sync Energy Link doesn't have built-in smart tariff integration — you'd need to set manual charging schedules or rely on your car's built-in timer.
The Andersen A3 supports smart tariff scheduling with popular EV tariffs.
The Andersen A3 comes with a 7 years warranty, while the Sync Energy Link offers 3 years. The Andersen A3 offers 4 years more coverage.
For weatherproofing, the Andersen A3 is rated IP54 (weatherproof), while the Sync Energy Link is rated IP65; IK10 (metal box) / IK08 (plastic box). Any rating of IP54 or above is suitable for a UK outdoor installation.
Detailed breakdown
Full specs comparison
Max Power Output
- Andersen A3
- 7.4kW (single-phase only)
- Sync Energy Link
- 7.4kW single-phase (32A), configurable 6–32A; no three-phase version
Cable Length
- Andersen A3
- 5.5 metres (hidden cable system)
- Sync Energy Link
- Untethered — supply your own Type 2 cable
Connector
- Andersen A3
- Type 2 (tethered)
- Sync Energy Link
- Type 2 socket with auto-lock; recessed (37mm) or surface (122mm) mounting in every kit
Connectivity
- Andersen A3
- Wi-Fi
- Sync Energy Link
- Wi-Fi 2.4GHz, Ethernet, Bluetooth 4.2; 4G on G models (3 years included)
Dimensions
- Andersen A3
- 388mm × 183mm × 122mm
- Sync Energy Link
- Outlet 176mm × 176mm; control box 231mm × 316mm × 100mm; up to 50 m apart
Weight
- Andersen A3
- ~7.5 kg
- Sync Energy Link
- Metal kit about 5.5 kg; plastic kit about 2.8 kg
IP Rating
- Andersen A3
- IP54 (weatherproof)
- Sync Energy Link
- IP65; IK10 (metal box) / IK08 (plastic box)
Certification
- Andersen A3
- OLEV/OZEV approved
- Sync Energy Link
- OZEV/EVCG approved (all 8 SKUs), IEC 61851-1, IEC 62955, Smart Charge Point Regulations
Protection
- Andersen A3
- —
- Sync Energy Link
- PEN fault protection built in; metal box has 40A Type A RCD, 40A MCB and Type 2 SPD fitted; plastic box has 30mA RCM + 6mA DC and needs upstream protection
Metering
- Andersen A3
- —
- Sync Energy Link
- Internal, ±2% (not MID); optional external Modbus meter
| Specification | Andersen A3 | Sync Energy Link |
|---|---|---|
| Max Power Output | 7.4kW (single-phase only) | 7.4kW single-phase (32A), configurable 6–32A; no three-phase version |
| Cable Length | 5.5 metres (hidden cable system) | Untethered — supply your own Type 2 cable |
| Connector | Type 2 (tethered) | Type 2 socket with auto-lock; recessed (37mm) or surface (122mm) mounting in every kit |
| Connectivity | Wi-Fi | Wi-Fi 2.4GHz, Ethernet, Bluetooth 4.2; 4G on G models (3 years included) |
| Dimensions | 388mm × 183mm × 122mm | Outlet 176mm × 176mm; control box 231mm × 316mm × 100mm; up to 50 m apart |
| Weight | ~7.5 kg | Metal kit about 5.5 kg; plastic kit about 2.8 kg |
| IP Rating | IP54 (weatherproof) | IP65; IK10 (metal box) / IK08 (plastic box) |
| Certification | OLEV/OZEV approved | OZEV/EVCG approved (all 8 SKUs), IEC 61851-1, IEC 62955, Smart Charge Point Regulations |
| Protection | — | PEN fault protection built in; metal box has 40A Type A RCD, 40A MCB and Type 2 SPD fitted; plastic box has 30mA RCM + 6mA DC and needs upstream protection |
| Metering | — | Internal, ±2% (not MID); optional external Modbus meter |
FAQ
Frequently asked questions.
Related comparisons