Skip to main content
TeslaCharger

Head to head

Indra Smart PRO vs EcoFlow PowerPulse 2: which extras are you paying for?

/5 min read

Buy the Indra Smart PRO if your electrician would otherwise charge for a surge protection device and a solar CT clamp — the extras in the box claw back the £54 premium and more. The EcoFlow PowerPulse 2 only makes sense if you already own, or are about to buy, an EcoFlow PowerOcean battery.

At a glance

Quick stats

Price
from £599
from £545
Power
7.4kW
7kW / 22kW
Warranty
3 years
3 years
Rating
4.2/5
4.1/5
Install Cost
£400–600
£400–600
Type
Tethered (Type 2)
Untethered (Type 2)

The £54 question isn't about £54

On paper this is a narrow gap. The EcoFlow PowerPulse 2 is £545, the Indra Smart PRO is £599, and the Indra asks £54 more for a charger that's single-phase only against the EcoFlow's 22kW capability. Read the spec sheet and the EcoFlow looks like the value pick.

The spec sheet is misleading. These two chargers are trying to do different things, and the right answer depends almost entirely on what else is already on — or about to be bolted to — your wall.

  • Indra Smart PRO — a British-made charger with surge protection and a solar CT clamp bundled in. The extras quietly recoup the premium at install.
  • EcoFlow PowerPulse 2 — a component of a solar-and-battery system. Brilliant if you own the rest of the kit, beside the point if you don't.

What the Indra's £54 premium actually buys

Two physical items in the box. A surge protection device (SPD), which a cautious electrician would otherwise fit for £100–£150 of parts and labour. And a CT clamp for solar diversion, typically £50–£100 on top.

So the sticker premium is £54. The installed-cost picture is inverted: on a standard fit with SPD and solar provision, the Indra Smart PRO lands cheaper on the wall than the EcoFlow PowerPulse 2 — often by £100 or more. That's the calculation the EcoFlow's three-phase headline buries.

Three-phase is the caveat. Fewer than one in twenty UK homes has it, but if yours does and you want to charge at 22kW, the Indra cannot and this conversation is already over — take the EcoFlow, or look at the Zaptec Go 2 or Wallbox Pulsar Max for more mature three-phase options.

When the EcoFlow makes sense

One scenario, clearly defined: you own, or are about to commission, an EcoFlow PowerOcean home battery and solar array. In that setup, the PowerPulse 2 joins solar generation, battery storage, house load and EV charging into a single app. No other charger does that specific job for that specific ecosystem.

Outside it, the picture dims. EcoFlow is new to wall-mounted EV charging — proven in portable power, unproven here. OZEV approval is not yet confirmed, which matters to grant-eligible buyers: the £500 grant (for renters and flat owners) isn't guaranteed to apply. The three-year warranty is fine but unremarkable next to the 10-year cover from the Simpson & Partners Home 7 or the five from Rolec EVO.

Tariffs and day-to-day use

Both chargers handle smart tariff scheduling. The Indra's app is functional rather than polished; it integrates with Octopus Intelligent Go, Octopus Go, OVO Charge Anytime and EDF GoElectric. EcoFlow's Smart Mode does the same job with its own logic, plus an LCD on the unit showing status without reaching for a phone. Neither is the class leader on tariff automation — for that you want the Ohme Home Pro, which is £64 less than the Indra and built around the API link.

Cable and connector differ in kind rather than degree. The Indra is tethered with a 6-metre cable. The EcoFlow is untethered by default, with a 5-metre tethered version available. If you want to tuck the cable away between uses — or share the charger with guests driving different cars — untethered wins. If you want to walk outside and plug in, tethered wins. Decide that before anything else.

The verdict

Buy the Indra Smart PRO if:

  • Your installer would otherwise add an SPD and CT clamp to the quote
  • You want British manufacturing and a tethered 6-metre cable
  • Your off-peak tariff is one of the supported integrations

Buy the EcoFlow PowerPulse 2 if:

  • You own (or are buying) an EcoFlow PowerOcean battery and solar setup
  • You have three-phase power and want 22kW capability
  • You prefer untethered charging and the on-unit LCD

On a typical single-phase UK install with solar ambitions, the Indra Smart PRO is the one to fit. The included extras do quiet, unglamorous work that shows up on the final invoice, not the product page. If the EcoFlow ecosystem isn't already part of your plan, there's little reason to buy into it through a charger — and for grant-eligible buyers, the unconfirmed OZEV status alone should settle it.

Detailed breakdown

Full specs comparison

SpecificationIndra Smart PROEcoFlow PowerPulse 2
Max Power Output7.4kW (single-phase only)7kW (single-phase) / 22kW (three-phase)
Cable Length6 metresUntethered (tethered 5m version available)
ConnectorType 2 (tethered or untethered)Type 2
ConnectivityWi-Fi, BluetoothWi-Fi, RFID
Dimensions340mm × 240mm × 115mm333mm × 226mm × 145mm
Weight~5.0 kg~3.5 kg
IP RatingIP54 (weatherproof)IP55 (IP54 when cable not connected)
CertificationOLEV/OZEV approvedOCPP 1.6-J compliant

FAQ

Frequently asked questions.

If your install would otherwise include a surge protection device (£100–£150) and a solar CT clamp (£50–£100), yes — the Indra Smart PRO includes both in the box, comfortably offsetting the £54 gap.
Not confirmed. EcoFlow has not yet confirmed OZEV approval, so grant-eligible renters and flat owners shouldn't assume the £500 applies. The Indra Smart PRO is OZEV-approved.
Yes — it supports 22kW three-phase as well as 7kW single-phase. The Indra Smart PRO is single-phase only, capped at 7.4kW.
It depends on your battery. EcoFlow PowerOcean owners should take the PowerPulse 2 for the single-app control. Everyone else is better served by the Indra Smart PRO's included CT clamp, or by the Zappi GLO.

We'll sort the installation

Get Installation Quotes