Head to head
Tesla Wall Connector vs EcoFlow PowerPulse 2: ecosystem or default?
Buy the Tesla Wall Connector at £478 unless you already own EcoFlow's PowerOcean battery — in which case the PowerPulse 2 at £545 earns its place by managing solar, battery and EV from one dashboard.
At a glance
Quick stats
Two chargers, two different reasons to buy
The Tesla Wall Connector (Gen 3) at £478 is an unusual thing: the official charger for the car, priced below most of the third-party field. The EcoFlow PowerPulse 2 at £545 is a different proposition entirely — a charger that exists to complete an EcoFlow energy ecosystem, not to stand alone on a wall.
The £67 gap isn't the point. The question is whether you're buying a charger, or buying the last piece of a home-energy system.
- Tesla Wall Connector — the default for a Tesla owner. 7.3-metre cable, native app, four-year warranty, £478.
- EcoFlow PowerPulse 2 — the charger for PowerOcean battery owners. Solar Mode, three-phase support, one dashboard for the whole house.
Who the EcoFlow PowerPulse 2 is actually for
EcoFlow are a known quantity in portable power stations. Wall chargers are new territory for them, and it shows in the asymmetry of the proposition: deep integration with PowerOcean batteries and EcoFlow solar, thinner footprint everywhere else. The three-year warranty is shorter than the Simpson & Partners Home 7 (ten years) or the Rolec EVO (five). OZEV approval isn't confirmed. The UK installer network is small.
None of which matters if you already own the rest of the ecosystem. If solar surplus flows into a PowerOcean battery, and you want that same app to decide when to top up the car, the PowerPulse 2 does a job nothing else on the market does. That's the whole pitch. Outside it, the features overlap with cheaper, better-warranted alternatives.
For non-EcoFlow solar, the Zappi GLO is the established answer — CT clamps, eco modes, a decade of refinement. Solar buyers outside the EcoFlow world should read the Tesla vs Zappi GLO comparison instead of this one.
What the Tesla Wall Connector gets right at £478
£478 for the official charger is the quiet anomaly of the UK market. The Ohme, the Hypervolt, the Andersen — all third-party, all more expensive. Tesla's own unit undercuts them while offering the longest tethered cable in the round-up (7.3 metres), native app integration that needs no setup for a Tesla driver, and over-the-air updates that add features without a service call.
The limits are honest. No OZEV approval means no £500 grant for renters or flat owners — though for owner-occupiers, the grant doesn't apply anyway. No solar diverting without a third-party CT clamp. Scheduling is manual, which is fine on a fixed-window tariff like Octopus Go or E.ON Next Drive, and a real constraint on Octopus Agile, where rates move every half-hour. IP44 means a weather-exposed wall wants a cover.
For a Tesla driver on a fixed off-peak window, these are footnotes.
The three-phase question
Both units offer 22kW on three-phase supplies. Under 5% of UK homes have three-phase, so for most readers this is moot. If you do have it — a converted farm, a rural new-build, a workshop — both chargers will deliver 22kW. The PowerPulse 2's ecosystem argument becomes slightly stronger in that scenario, because three-phase installs often coincide with larger solar arrays and home batteries. But the logic is still the same: you're buying the ecosystem, not the charger.
Which to buy
Buy the Tesla Wall Connector (Gen 3) if:
- You drive a Tesla and charge on a fixed off-peak window
- You want the longest tethered cable (7.3m) and the cheapest route to the official charger
- You don't need solar diverting or grant eligibility
Buy the EcoFlow PowerPulse 2 if:
- You already own an EcoFlow PowerOcean battery or are committing to one
- You want one app managing solar, battery, house and EV together
- You have three-phase supply and an EcoFlow-based energy setup
For almost every Tesla owner reading this, the Wall Connector at £478 is the answer. The PowerPulse 2 is the right charger only if the rest of your house is already EcoFlow — and if it is, you probably knew that before opening this page. For variable-tariff drivers, the Ohme Home Pro is the smarter detour; for non-EcoFlow solar, the Zappi GLO. Neither of those is what this comparison is about.
Detailed breakdown
Full specs comparison
| Specification | Tesla Wall Connector (Gen 3) | EcoFlow PowerPulse 2 |
|---|---|---|
| Max Power Output | 7.4kW (single-phase) / 22kW (three-phase) | 7kW (single-phase) / 22kW (three-phase) |
| Cable Length | 7.3 metres | Untethered (tethered 5m version available) |
| Connector | Type 2 (tethered) | Type 2 |
| Connectivity | Wi-Fi | Wi-Fi, RFID |
| Dimensions | 353mm × 152mm × 124mm | 333mm × 226mm × 145mm |
| Weight | 5.3 kg | ~3.5 kg |
| IP Rating | IP44 (indoor/outdoor) | IP55 (IP54 when cable not connected) |
| Certification | Not OZEV approved | OCPP 1.6-J compliant |
FAQ
Frequently asked questions.
Related comparisons

