Head to head
Hypervolt Home 3 Pro vs EcoFlow PowerPulse 2
The decision
The decision
- Hypervolt installed
- £1,025–£1,225
- £625 unit
- EcoFlow installed
- £1,054–£1,254
- £654 unit
- Hypervolt warranty
- 3 years (extendable to 5)
- EcoFlow warranty
- 3 years
Choose Hypervolt Home 3 Pro if
Choose EcoFlow PowerPulse 2 if
Installed ranges combine the current unit or package price with the recorded installation basis. Complex cable runs and electrical work can cost more.


At a glance
Quick stats
A £29 gap and a much wider divide
These two chargers sit almost side by side on price — the Hypervolt Home 3 Pro at £625, the EcoFlow PowerPulse 2 at £654. The £29 difference is negligible. What separates them is purpose.
- Hypervolt Home 3 Pro — a well-rounded tethered charger with the toughest build rating in its class and up to 10 metres of cable. Does everything competently; nothing spectacularly.
- EcoFlow PowerPulse 2 — an ecosystem device. Its best features — unified solar, battery, and EV management — are gated behind owning EcoFlow's PowerOcean hardware. Without that hardware, the case thins fast.
The OZEV question hanging over the PowerPulse 2
This is the single most important difference and it has nothing to do with specs. The Hypervolt Home 3 Pro is OZEV-approved. The EcoFlow PowerPulse 2 is not — at least not yet. For eligible renters and flat owners, the £500 OZEV grant knocks the Hypervolt down to £125 before installation. The EcoFlow stays at £654 until approval comes through, if it does.
That is not a marginal distinction. It is a £529 swing. Even if you are not grant-eligible, the Hypervolt's confirmed approval signals something about regulatory confidence in the product. EcoFlow are proven in portable power stations; wall-mounted EV chargers are a newer venture for them, and the UK installer network is still small. The Hypervolt, by contrast, is UK-designed, UK-built, and backed by a phone support line that — by reputation — answers in single-digit seconds.
Build quality and cable reach
The Hypervolt carries an IP66 + IK10 rating. IP66 means sealed against powerful water jets; IK10 means it can take a 20-joule impact without damage. If your charger lives on an exposed driveway wall, or anywhere a wheelie bin might clip it on collection day, that matters.
The EcoFlow is rated IP55 — adequate for rain, but a step below on both water ingress and impact resistance. Not a fatal flaw, but at £654 you might expect parity.
Cable options widen the gap further. The Hypervolt is tethered with 5-metre, 7.5-metre, and 10-metre cable lengths. Ten metres is the longest tethered cable on any charger in our catalogue, and it solves the "charging port is on the wrong side" problem without trailing a cable across the floor. The EcoFlow's default configuration is untethered — you supply your own Type 2 cable — though a tethered 5-metre version exists. If you want a long, permanently attached cable, the Hypervolt is the only option here.
When the EcoFlow earns its price
There is one scenario where the PowerPulse 2 is the right call: you own or are installing an EcoFlow PowerOcean home battery. In that setup, the charger's Solar Mode and Smart Mode operate within a single app that orchestrates panels, battery, household load, and EV charging together. No other charger on the market talks to EcoFlow's battery stack this way. If you are already spending thousands on PowerOcean hardware, adding the PowerPulse 2 at £654 is a logical extension — the marginal cost of unified control.
The charger also supports 22kW three-phase charging, which the Hypervolt does not. Fewer than one in twenty UK homes have a three-phase supply, but if yours does, the EcoFlow can deliver three times the power. Buyers in that narrow bracket who also want EcoFlow ecosystem integration have a clear answer.
Outside that scenario, the EcoFlow's advantages dissipate. Its Solar Mode exists, but without an EcoFlow battery to buffer surplus generation, the Zappi GLO does solar diversion with more granularity via its Eco+ mode — and at £599, it costs £55 less. Its tariff scheduling works, but the Ohme Home Pro at £539 chases half-hourly rates on Octopus Agile with more sophistication. The PowerPulse 2 is a competent charger bolted to an ecosystem play. Remove the ecosystem and you are paying a premium for an LCD screen and OCPP compliance.
The verdict
Buy the Hypervolt Home 3 Pro if:
- You want a reliable, OZEV-approved charger that does smart scheduling, solar diversion (via CT clamp), and load management without fuss
- Cable reach matters — 7.5-metre and 10-metre options are available nowhere else at this price
- You value IP66 + IK10 protection and UK-based support
Buy the EcoFlow PowerPulse 2 if:
- You already own or are buying an EcoFlow PowerOcean battery and want one app for the whole energy system
- Your home has a three-phase supply and you want 22kW charging
- You are comfortable with the unconfirmed OZEV status and a newer installer network
For most buyers — which is to say, anyone without an EcoFlow battery on the wall — the Hypervolt is the sounder choice. It costs £29 less, it is grant-eligible, it is tougher, and it offers cable lengths the EcoFlow cannot match. The EcoFlow PowerPulse 2 is a good charger inside its own ecosystem. Outside it, the Hypervolt does the job better and for less money.
Detailed breakdown
Full specs comparison
Max Power Output
- Hypervolt Home 3 Pro
- 7.4kW (single-phase only)
- EcoFlow PowerPulse 2
- 7kW (single-phase) / 22kW (three-phase)
Cable Length
- Hypervolt Home 3 Pro
- 5m / 7.5m / 10m options
- EcoFlow PowerPulse 2
- Untethered (tethered 5m version available)
Connector
- Hypervolt Home 3 Pro
- Type 2 (tethered)
- EcoFlow PowerPulse 2
- Type 2
Connectivity
- Hypervolt Home 3 Pro
- Wi-Fi, Bluetooth
- EcoFlow PowerPulse 2
- Wi-Fi, RFID
Dimensions
- Hypervolt Home 3 Pro
- 270mm × 170mm × 110mm
- EcoFlow PowerPulse 2
- 333mm × 226mm × 145mm
Weight
- Hypervolt Home 3 Pro
- ~4.5 kg
- EcoFlow PowerPulse 2
- ~3.5 kg
IP Rating
- Hypervolt Home 3 Pro
- IP66 + IK10 (weatherproof + impact-resistant)
- EcoFlow PowerPulse 2
- IP55 (IP54 when cable not connected)
Certification
- Hypervolt Home 3 Pro
- OLEV/OZEV approved
- EcoFlow PowerPulse 2
- OCPP 1.6-J compliant
| Specification | Hypervolt Home 3 Pro | EcoFlow PowerPulse 2 |
|---|---|---|
| Max Power Output | 7.4kW (single-phase only) | 7kW (single-phase) / 22kW (three-phase) |
| Cable Length | 5m / 7.5m / 10m options | Untethered (tethered 5m version available) |
| Connector | Type 2 (tethered) | Type 2 |
| Connectivity | Wi-Fi, Bluetooth | Wi-Fi, RFID |
| Dimensions | 270mm × 170mm × 110mm | 333mm × 226mm × 145mm |
| Weight | ~4.5 kg | ~3.5 kg |
| IP Rating | IP66 + IK10 (weatherproof + impact-resistant) | IP55 (IP54 when cable not connected) |
| Certification | OLEV/OZEV approved | OCPP 1.6-J compliant |
FAQ
Frequently asked questions.
Related comparisons